Silhouette business edition manual11/10/2022
Check to see if this test cut has the proper depth. When you perform a test cut, the Silhouette will cut a small triangle in the upper left corner of your material. QUICK TIP: ALWAYS DO A TEST CUT FIRST BY CLICKING THE “TEST” BUTTON When you are ready to cut your design, simply press “SEND” at the bottom and your design will begin to cut. The Silhouette Cameo 4 uses an autoblade which means that all you have to do is insert the autoblade into the left-hand carriage and it will automatically adjust the blade depth based on the settings from the dropdown menu. When you choose a material, the blade settings will automatically update. Choose your material from the dropdown menu. In the Silhouette software, set up your file and make sure that your lines are set to cut. Press the load button (the up arrow on the right side of the machine) and the cutting mat will be pulled into the machine. Feed the cutting mat into the Silhouette by placing it under the white rollers. To use the Silhouette Cameo 4, place your material on the cutting mat, lining it up with the grid. If you do not want to use the Bluetooth function, you can connect it via cord. This is especially useful if your computer and Silhouette machine are on opposite sides of the room. The Cameo 4 is Bluetooth enabled so you can connect it wirelessly to your computer. Silhouette business edition manual pro#The Silhouette Cameo 4 can cut materials up to 12″ in width and the Pro version can cut up to 24″ in width.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |